New engine dyno numbers???? E street - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech New engine dyno numbers???? E street

Print Thread

Page 1 of 2

1

2

New engine dyno numbers???? E street #1429689 05/03/13 03:42 PM 05/03/13 03:42 PM
Joined: Jun 2010 Posts: 57 CT 4 440Kilmartin OP member
440Kilmartin OP member 4 Joined: Jun 2010 Posts: 57 CT	Pump gas 500" hydraulic rb . EDELBROCK estreet heads. guess my dyno numbers Last edited by 440Kilmartin; 05/03/13 03:51 PM.

Re: New engine dyno numbers???? [Re: 440Kilmartin] #1429690 05/03/13 03:43 PM 05/03/13 03:43 PM
Joined: Jun 2010 Posts: 57 CT 4 440Kilmartin OP member
440Kilmartin OP member 4 Joined: Jun 2010 Posts: 57 CT	Pic 7692710-image.jpg (140 downloads)

Re: New engine dyno numbers???? E street [Re: 440Kilmartin] #1429691 05/03/13 05:26 PM 05/03/13 05:26 PM
Joined: Feb 2009 Posts: 1,705 Nebraska 70VcodeCoronetRT top fuel
70VcodeCoronetRT top fuel Joined: Feb 2009 Posts: 1,705 Nebraska	Without knowing much, I'll guess 540hp. And torque around 610.

Re: New engine dyno numbers???? E street [Re: 440Kilmartin] #1429692 05/03/13 06:15 PM 05/03/13 06:15 PM
Joined: Aug 2003 Posts: 43,211 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,211 Bend,OR USA	600 HP and 640 Ft lbs on pump gas Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: New engine dyno numbers???? E street [Re: Cab_Burge] #1429693 05/03/13 08:11 PM 05/03/13 08:11 PM
Joined: Jun 2004 Posts: 6,780 Alabama Mopar-Al master
Mopar-Al master Joined: Jun 2004 Posts: 6,780 Alabama	Not enough. It never is. I can only guess zero with the engine off since you didn't give no clues to nothing. A cadillac 500 pump gas hydraulic made around 290 hp. Get the point?

Re: New engine dyno numbers???? E street [Re: 440Kilmartin] #1429694 05/03/13 08:26 PM 05/03/13 08:26 PM
Joined: Feb 2005 Posts: 4,316 Prospect, PA BSB67 master
BSB67 master Joined: Feb 2005 Posts: 4,316 Prospect, PA	Cam size? Compression Ratio? Head Work? Carb size?

Re: New engine dyno numbers???? E street [Re: 440Kilmartin] #1429695 05/04/13 12:19 AM 05/04/13 12:19 AM
Joined: Jun 2010 Posts: 57 CT 4 440Kilmartin OP member
440Kilmartin OP member 4 Joined: Jun 2010 Posts: 57 CT	Well it's a hughes 569/576 lift. heads have some port work .10.8:1 compression . She made 592hp @ 5500rpm and 648tq @ 4100 rpm . 4 speed full street car 7693279-image.jpg (77 downloads) Last edited by 440Kilmartin; 05/04/13 12:21 AM.

Re: New engine dyno numbers???? E street [Re: 440Kilmartin] #1429696 05/04/13 02:40 AM 05/04/13 02:40 AM
Joined: Aug 2003 Posts: 43,211 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,211 Bend,OR USA	What size carb. did you do the dyno testing with? Did you do any timing and jetting testing? Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: New engine dyno numbers???? E street [Re: Cab_Burge] #1429697 05/04/13 03:42 AM 05/04/13 03:42 AM
Joined: Feb 2011 Posts: 4,302 Nebraska 72Swinger master
72Swinger master Joined: Feb 2011 Posts: 4,302 Nebraska	Been considering building a similar engine. Curious what lifters,valve springs and rockers you used. Graph doesnt "look" like the power fell off after peak due to any lifter pump or float. Ive been considering a Howards .600 lift hydraulic roller. Mopar to the bone!!!

Re: New engine dyno numbers???? E street [Re: Cab_Burge] #1429698 05/04/13 07:44 AM 05/04/13 07:44 AM
Joined: Jun 2010 Posts: 57 CT 4 440Kilmartin OP member
440Kilmartin OP member 4 Joined: Jun 2010 Posts: 57 CT	It's an old 850 holley . And yes we did spend the day playing with timing and jetting . It made the power with 35 degrees in it on pump gas... And can lifters and springs is all from Hughes . Last edited by 440Kilmartin; 05/04/13 07:48 AM.

Re: New engine dyno numbers???? E street [Re: 440Kilmartin] #1429699 05/04/13 09:21 AM 05/04/13 09:21 AM
Joined: Feb 2005 Posts: 4,316 Prospect, PA BSB67 master
BSB67 master Joined: Feb 2005 Posts: 4,316 Prospect, PA	Those are nice numbers. That should put your mph solidly into the mid 120s and et in the 10s.

Re: New engine dyno numbers???? E street [Re: 440Kilmartin] #1429700 05/04/13 10:18 AM 05/04/13 10:18 AM
Joined: Oct 2003 Posts: 11,684 W. Kentucky justinp61 I Live Here
justinp61 I Live Here Joined: Oct 2003 Posts: 11,684 W. Kentucky	I hope you have some good drive line parts . Good numbers .

Re: New engine dyno numbers???? E street [Re: justinp61] #1429701 05/04/13 11:03 AM 05/04/13 11:03 AM
Joined: Aug 2007 Posts: 1,271 Vista, California 6 67Satty pro stock
67Satty pro stock 6 Joined: Aug 2007 Posts: 1,271 Vista, California	Nice numbers! On another note, I don't really get the deal with the E Streets. They same to have the same specs as the RPMs and cost the same. Some of the hardware they put on them is different right? I don't get why they have two different offerings that are so similar.

Re: New engine dyno numbers???? E street [Re: 67Satty] #1429702 05/04/13 11:54 AM 05/04/13 11:54 AM
Joined: Jun 2010 Posts: 57 CT 4 440Kilmartin OP member
440Kilmartin OP member 4 Joined: Jun 2010 Posts: 57 CT	They are identical except for the springs which were changed anyways EDELBROCK says that the rpm and estreets are made from the same castings and just wanted to offer a small chamber head to improve low compression street motors. I got mine when they first came out on sale for quite a bit less than the rpm

Re: New engine dyno numbers???? E street [Re: 440Kilmartin] #1429703 05/04/13 12:03 PM 05/04/13 12:03 PM
Joined: Aug 2003 Posts: 43,211 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,211 Bend,OR USA	What CC are those heads? Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: New engine dyno numbers???? E street [Re: Cab_Burge] #1429704 05/04/13 12:15 PM 05/04/13 12:15 PM
Joined: Jun 2010 Posts: 57 CT 4 440Kilmartin OP member
440Kilmartin OP member 4 Joined: Jun 2010 Posts: 57 CT	84cc with port work and some bowl work

Re: New engine dyno numbers???? E street [Re: 440Kilmartin] #1429705 05/04/13 12:45 PM 05/04/13 12:45 PM
Joined: Feb 2005 Posts: 4,316 Prospect, PA BSB67 master
BSB67 master Joined: Feb 2005 Posts: 4,316 Prospect, PA	I thought that they came with 75cc chambers? If so, then 84cc now would mean a lot of bowl work.

Re: New engine dyno numbers???? E street [Re: BSB67] #1429706 05/04/13 12:50 PM 05/04/13 12:50 PM
Joined: Jul 2004 Posts: 19,317 State of confusion T Thumperdart I Live Here
Thumperdart I Live Here T Joined: Jul 2004 Posts: 19,317 State of confusion	Quote: I thought that they came with 75cc chambers? If so, then 84cc now would mean a lot of bowl work. What does bowl work have 2 do w/chamber cc`s? 72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....

Re: New engine dyno numbers???? E street [Re: Thumperdart] #1429707 05/04/13 12:54 PM 05/04/13 12:54 PM
Joined: Feb 2005 Posts: 4,316 Prospect, PA BSB67 master
BSB67 master Joined: Feb 2005 Posts: 4,316 Prospect, PA	Nothing....mis-spoke. Still, I thought they had 75 cc chambers.

Re: New engine dyno numbers???? E street [Re: BSB67] #1429708 05/04/13 12:57 PM 05/04/13 12:57 PM
Joined: Jul 2004 Posts: 19,317 State of confusion T Thumperdart I Live Here
Thumperdart I Live Here T Joined: Jul 2004 Posts: 19,317 State of confusion	I understand............ 72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....

Page 1 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1