1970 CUDA DOME LIGHT INSTALLATION - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum 1970 CUDA DOME LIGHT INSTALLATION

Print Thread

1970 CUDA DOME LIGHT INSTALLATION #1094361 10/14/11 04:09 PM 10/14/11 04:09 PM
Joined: Aug 2008 Posts: 18 PENNSYLVANIA, USA R RAPID1055 OP member
RAPID1055 OP member R Joined: Aug 2008 Posts: 18 PENNSYLVANIA, USA	In process of replacing me dash pad. I figured this would be a good time to get the Dome light functioning. 1. Where does the Yellow & pink wires route/connect to. 2. What color coded wires should be connected to the left and right two terminal door switches. Without help I will most likely end up taking apart the whole car. Also, for the most part my repair manual is good, however it's the size of an aircraft manual and some information is marginal. Would appreciate your help

Re: 1970 CUDA DOME LIGHT INSTALLATION [Re: RAPID1055] #1094362 10/14/11 04:16 PM 10/14/11 04:16 PM
Joined: Mar 2003 Posts: 8,850 Central Coast, Calif. S Snoopy master
Snoopy master S Joined: Mar 2003 Posts: 8,850 Central Coast, Calif.	6871245-ei111.jpg (696 downloads)

Re: 1970 CUDA DOME LIGHT INSTALLATION [Re: RAPID1055] #1094363 10/14/11 04:20 PM 10/14/11 04:20 PM
Joined: Jun 2003 Posts: 21,442 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,442 It's a dry heat	Dome lamp wiring runs down the drivers side C-pillar area and connect in the left body wiring with a 2 pin white connector. The 2 door switches have a single yellow wire on each that connects to the main dash harness.

Re: 1970 CUDA DOME LIGHT INSTALLATION [Re: Snoopy] #1094364 10/14/11 04:31 PM 10/14/11 04:31 PM
Joined: Aug 2008 Posts: 18 PENNSYLVANIA, USA R RAPID1055 OP member
RAPID1055 OP member R Joined: Aug 2008 Posts: 18 PENNSYLVANIA, USA	Snoopy...appreciate the quick response and diagram. Thanks Rapid1055

Re: 1970 CUDA DOME LIGHT INSTALLATION [Re: gtx6970] #1094365 10/14/11 04:35 PM 10/14/11 04:35 PM
Joined: Aug 2008 Posts: 18 PENNSYLVANIA, USA R RAPID1055 OP member
RAPID1055 OP member R Joined: Aug 2008 Posts: 18 PENNSYLVANIA, USA	gtx6970..appreciate the quick response and the process. Thanks for all your help Rapid1055

Re: 1970 CUDA DOME LIGHT INSTALLATION [Re: Snoopy] #1094366 10/14/11 05:04 PM 10/14/11 05:04 PM
Joined: Aug 2008 Posts: 18 PENNSYLVANIA, USA R RAPID1055 OP member
RAPID1055 OP member R Joined: Aug 2008 Posts: 18 PENNSYLVANIA, USA	Snoopy. Can you tell where that drawing came from? That is a well developed drawing and would appreciate it if you could pass on the manual name or how I can get the info.

Re: 1970 CUDA DOME LIGHT INSTALLATION [Re: RAPID1055] #1094367 10/14/11 05:50 PM 10/14/11 05:50 PM
Joined: Mar 2003 Posts: 8,850 Central Coast, Calif. S Snoopy master
Snoopy master S Joined: Mar 2003 Posts: 8,850 Central Coast, Calif.	It is a factory assembly line drawing. I managed to get it off another website before it was shut down. Faxon Auto Literature was suppose to offer complete manuals with these drawings, but so far they only offer ones for 1969. It looks like it was put on hold when Chrysler went into restructuring. Faxon Assembly Line Manuals Narrow search on left hand side of screen to 1969 and you can see what they have available. Great for the 69 people, bad for everyone else.

Re: 1970 CUDA DOME LIGHT INSTALLATION [Re: Snoopy] #1094368 10/14/11 06:51 PM 10/14/11 06:51 PM
Joined: Aug 2008 Posts: 18 PENNSYLVANIA, USA R RAPID1055 OP member
RAPID1055 OP member R Joined: Aug 2008 Posts: 18 PENNSYLVANIA, USA	Oh boy that's to bad. That would make things much easier. Anyway thanks to you I can proceed with the install. Please if you ever hear or find them would let me know Snoopy. Many thanks Would the 69 be of any value..any commonality between 69 and 70 Cuda

Re: 1970 CUDA DOME LIGHT INSTALLATION [Re: RAPID1055] #1094369 10/16/11 07:09 PM 10/16/11 07:09 PM
Joined: Mar 2003 Posts: 8,850 Central Coast, Calif. S Snoopy master
Snoopy master S Joined: Mar 2003 Posts: 8,850 Central Coast, Calif.	Quote: Would the 69 be of any value..any commonality between 69 and 70 Cuda None, 69 is an A-Body and 70 is an E-Body.

Re: 1970 CUDA DOME LIGHT INSTALLATION [Re: Snoopy] #1094370 10/17/11 10:01 AM 10/17/11 10:01 AM
Joined: Jun 2008 Posts: 1,822 Colorado D denfireguy top fuel
denfireguy top fuel D Joined: Jun 2008 Posts: 1,822 Colorado	Quote: It is a factory assembly line drawing. I managed to get it off another website before it was shut down. Faxon Auto Literature was suppose to offer complete manuals with these drawings, but so far they only offer ones for 1969. It looks like it was put on hold when Chrysler went into restructuring. Faxon Assembly Line Manuals Narrow search on left hand side of screen to 1969 and you can see what they have available. Great for the 69 people, bad for everyone else. I am glad you saved that stuff. I made the mistake of just saving the links to information. Then a month later you click on the link and get the dreaded "This domain name is now available" screen. I now collect the web pages themselves. Craig 2014 Ram 1500 Laramie, 73 Cuda Previous mopars: 62 Valiant, 65 Fury III, 68 Fury III, 72 Satellite, 74 Satellite, 89 Acclaim, 98 Caravan, 2003 Durango Only previous Non-Mopar: Schwinn Tornado

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1