1970 CUDA DOME LIGHT INSTALLATION

Posted By: RAPID1055

1970 CUDA DOME LIGHT INSTALLATION - 10/14/11 08:09 PM

In process of replacing me dash pad. I figured this would be a good time to get the Dome light functioning.
1. Where does the Yellow & pink wires route/connect to.
2. What color coded wires should be connected to the left and right two terminal door switches.
Without help I will most likely end up taking apart the whole car.
Also, for the most part my repair manual is good, however it's the size of an aircraft manual and some information is marginal.
Would appreciate your help

Posted By: Snoopy

Re: 1970 CUDA DOME LIGHT INSTALLATION - 10/14/11 08:16 PM

Posted By: gtx6970

Re: 1970 CUDA DOME LIGHT INSTALLATION - 10/14/11 08:20 PM

Dome lamp wiring runs down the drivers side C-pillar area and connect in the left body wiring with a 2 pin white connector.
The 2 door switches have a single yellow wire on each that connects to the main dash harness.

Posted By: RAPID1055

Re: 1970 CUDA DOME LIGHT INSTALLATION - 10/14/11 08:31 PM

Snoopy...appreciate the quick response and diagram.
Thanks Rapid1055

Posted By: RAPID1055

Re: 1970 CUDA DOME LIGHT INSTALLATION - 10/14/11 08:35 PM

gtx6970..appreciate the quick response and the process.
Thanks for all your help
Rapid1055

Posted By: RAPID1055

Re: 1970 CUDA DOME LIGHT INSTALLATION - 10/14/11 09:04 PM

Snoopy.
Can you tell where that drawing came from?
That is a well developed drawing and would appreciate it
if you could pass on the manual name or how I can get the info.

Posted By: Snoopy

Re: 1970 CUDA DOME LIGHT INSTALLATION - 10/14/11 09:50 PM

It is a factory assembly line drawing. I managed to get it off another website before it was shut down. Faxon Auto Literature was suppose to offer complete manuals with these drawings, but so far they only offer ones for 1969. It looks like it was put on hold when Chrysler went into restructuring.

Faxon Assembly Line Manuals

Narrow search on left hand side of screen to 1969 and you can see what they have available. Great for the 69 people, bad for everyone else.

Posted By: RAPID1055

Re: 1970 CUDA DOME LIGHT INSTALLATION - 10/14/11 10:51 PM

Oh boy that's to bad. That would make things much easier.
Anyway thanks to you I can proceed with the install.
Please if you ever hear or find them would let me know Snoopy.
Many thanks

Would the 69 be of any value..any commonality between 69 and 70
Cuda

Posted By: Snoopy

Re: 1970 CUDA DOME LIGHT INSTALLATION - 10/16/11 11:09 PM

Quote:

Would the 69 be of any value..any commonality between 69 and 70
Cuda

None, 69 is an A-Body and 70 is an E-Body.

Posted By: denfireguy

Re: 1970 CUDA DOME LIGHT INSTALLATION - 10/17/11 02:01 PM

Quote:

It is a factory assembly line drawing. I managed to get it off another website before it was shut down. Faxon Auto Literature was suppose to offer complete manuals with these drawings, but so far they only offer ones for 1969. It looks like it was put on hold when Chrysler went into restructuring.

Faxon Assembly Line Manuals

Narrow search on left hand side of screen to 1969 and you can see what they have available. Great for the 69 people, bad for everyone else.

I am glad you saved that stuff. I made the mistake of just saving the links to information. Then a month later you click on the link and get the dreaded "This domain name is now available" screen. I now collect the web pages themselves.
Craig