Re: real men port cast iron heads
[Re: Joesixpack]
#1015371
06/19/11 05:32 PM
06/19/11 05:32 PM
|
Joined: Jan 2003
Posts: 11,912 APACHE JUNCTION AZ
Joesixpack
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 11,912
APACHE JUNCTION AZ
|
I did a pair of 906s sitting on top of a garbage can in an alley,when i worked at Borowskis back in 87,went to a guy in Kankakee or Bourbanais named Alan, went on a street racer. were not pretty but,did not hit any water jackets,2.14/1.81 valves,epoxied some spring cups for big triples,intake ports ended up not fitting any known or avail gasket....had to make them..they ported the intake to match,worked great on a .060 440 with 4.00 stroker crank...i think it was around 511-512 cubes...real old school as that is what we knew back then.
|
|
|
Re: real men port cast iron heads
[Re: Joesixpack]
#1015373
06/19/11 09:00 PM
06/19/11 09:00 PM
|
Joined: Jan 2003
Posts: 9,146 Now - Port Orange,Fla. Former...
MIKES_DUSTER
master
|
master
Joined: Jan 2003
Posts: 9,146
Now - Port Orange,Fla. Former...
|
Quote:
wow Mike those 915 Js are SWEET!got a pair of bare virgins i will send to ya,make em look like that!LOL worth at least two tenths!
Thanks Joe!!!!! But I cant take the credit. A real good friend in Ky ported and flowed them for me. He is VERY reasonable and GOOD!!!! He said that they were the BEST stock smallblock head he has done. They flowed pretty well too.
|
|
|
Re: real men port cast iron heads
[Re: Crizila]
#1015374
06/19/11 09:21 PM
06/19/11 09:21 PM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
master
|
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
Dwayne and I did some Equest heads together, and you'd be surprised at what they responded to, what they didnt like, and what made them go backwards. Some of standard cylinder heads mods, didnt respond well. Some very very simple things worked excellent. Its not always bigger and hawged out is better. Shiny doesnt mean fast.... ...they are great little heads in my opinion, and can be made to work very well with MINIMAL work.
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
|
|