Quote:

---

Quote:

---

All I was trying to get at is don't buy a sh!++% old cam. I subscribe to the theory that there is no such thing as too big of a cam/conv/gear. Of course this is the wrong forum for that, but I must explain where I come from.

---

I agree on the cam/conv/gear thing, but not that the 292 is a sh$$$ old cam. Ive known forphorty for a long time and his stuff runs hard...with hardly anything. Ask the all knowers if his stuff should run 12.30s with... gasp....3.23s...

---

Anything is possible. In this case, WEIGHT is the
big factor. Bunch of mass to move (a little over two tons w/ driver) and the low end/strong midrange level cams would get the job done. Higher lifts (.500 or better) would only help MORE.