Need some help picking a cam for a low budget build.

.040 over 440, Keith Black pistons, 6 pack rods. 10 to 1 compression. Street Dominator Intake, 800 Holley Double Pumper, 346 heads that are stock except being freshened. 2 inch headers. Car should weigh around 3800 lbs. I have a 9.5 inch converter that should flash close to 4 thousand RPMs. 3.55 or 4.10 gear.

Im figuring the headers are probably a little big, but that is all I have at the moment.

Due to a shortage of funds, Im stuck with an off the shelf grind. Looking for recommendations for both a solid and a hydraulic.

If anybody has built a similar motor, ET, MPH and cam used would be great also!!!



BTW, Im not interested in the VooDoo grinds, anything else is fine. Long story.