Quote:

Kevin on breaking the arm loose from the knuckle I couldn't on mine either, I took out the two bolts that hold the lower part of the knuckle to the upper part, if my memory is right it takes a 15/16" socket and wrench to get these loose, this is the part that the lower ball joint goes through and just bought them that way. Then when I got them home I was able to seperate the ball joint from that lower part of the knuckle. As far as I know on your question about 1/2 ton vans. I'm pretty sure as long as they have the spring pocket in the arm they are the same. Hope this helps you. See ya at the Music City show.



Thanks for the tip. I was kinda frustrated yesterday. I didn't have much time to do it (lunch break) and some goober started taking something off the rear axle when I was tugging on it. I was afraid I'd knock the van off the wheels they had it propped up on and crush the guy, so I left.

I gotta put some tires on my wife's Durango Saturday morning. After that, I'm heading to Lebanon for the Mopar show. I'll see you there.