Quote:

power valve gasket-not only for tears but position on the power valve

what do you mean the position of the power valve?
i did replace the power from 6.5 to 3.5 with a new one


I have seen power valves with the gasket off center sitting on the step allowing a leak.
While you're atit make sure the floats aren't heavy from a leak,the air filter is clean and that the hood insulation isn't blocking air to the carb. This actually happened to a friend.I won't mention any names.
Ron

Last edited by runinonmt; 02/13/10 03:15 PM.