Cam too big?

Print Thread

Re: Cam too big? [Re: RobX4406] #612134 02/13/10 01:16 PM 02/13/10 01:16 PM
Joined: Dec 2007 Posts: 1,639 Brandon, Ms C cornet684me OP top fuel
cornet684me OP top fuel C Joined: Dec 2007 Posts: 1,639 Brandon, Ms	i have to keep the idle at 1000 to get the engine running good at idle in gear, when i put in gear at 1000 if only drops to about 900 to 950 at idle, so i think i am okay there

Entire Thread
Subject	Posted By	Posted
Cam too big?	cornet684me	02/13/10 05:47 AM
Re: Cam too big?	CurYellowBird	02/13/10 05:51 AM
Re: Cam too big?	cornet684me	02/13/10 05:53 AM
Re: Cam too big?	DaytonaTurbo	02/13/10 05:55 AM
Re: Cam too big?	cornet684me	02/13/10 06:12 AM
Re: Cam too big?	CurYellowBird	02/13/10 06:20 AM
Re: Cam too big?	cornet684me	02/13/10 06:29 AM
Re: Cam too big?	WILD BILL	02/13/10 06:35 AM
Re: Cam too big?	cornet684me	02/13/10 06:42 AM
Re: Cam too big?	RobX4406	02/13/10 07:10 AM
Re: Cam too big?	cornet684me	02/13/10 05:16 PM
Re: Cam too big?	DaytonaTurbo	02/14/10 05:34 AM
Re: Cam too big?	dave571	02/14/10 06:08 AM
Re: Cam too big?	DaytonaTurbo	02/14/10 06:32 PM
Re: Cam too big?	Rodney	02/13/10 07:22 AM
Re: Cam too big?	runinonmt	02/13/10 02:19 PM
Re: Cam too big?	DragDart360	02/13/10 03:08 PM
Re: Cam too big?	cornet684me	02/13/10 05:07 PM
Re: Cam too big?	cornet684me	02/13/10 05:15 PM
Re: Cam too big?	cornet684me	02/13/10 05:23 PM
Re: Cam too big?	cornet684me	02/13/10 05:26 PM
Re: Cam too big?	Dodgem	02/13/10 05:44 PM
Re: Cam too big?	cornet684me	02/13/10 05:52 PM
Re: Cam too big?	runinonmt	02/13/10 06:39 PM
Re: Cam too big?	forphorty	02/13/10 07:19 PM
Re: Cam too big?	blownzoom440	02/13/10 04:06 PM
Re: Cam too big?	cornet684me	02/13/10 05:10 PM
Re: Cam too big?	jbc426	02/13/10 09:20 PM
Re: Cam too big?	MoparDonny	02/14/10 12:22 AM
Re: Cam too big?	dave571	02/14/10 02:17 AM
Re: Cam too big?	Skeptic	02/17/10 05:00 AM
Re: Cam too big?	RobX4406	02/14/10 04:07 AM
Re: Cam too big?	DaytonaTurbo	02/14/10 05:31 AM
Re: Cam too big?	dragaddict	02/14/10 06:26 PM
Re: Cam too big?	Dougsmopars	02/14/10 06:44 PM
Re: Cam too big?	cornet684me	02/16/10 04:34 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To