This seat belt warning light and bezel, seen in pic below - is either 1) commonly missing on most restorations or 2) it just wasn't installed into too many cars - maybe only E conv's were to come through with one or those cars ordered with loaded light packages, of either A01/A04. Some one here should be able to clear the facts as I cannot.

Gran Coupe/SE/leather optioned HTs with overhead console would not require/have one, there is already a warning light in the console, but the convs may have had one.

Can't find it mentioned in the '70 Plymouth FSM or anywhere on the wiring diagram - the only mention of a replacement bulb there for any seat belt indicator is for a four door model Mopar.

Car has SPD of 7/3/70. Anyone else here have one of these in their E Body or seen one in one before? It is fed by the tan accessory feed on dash harness. The dash frame has a hole where this or the 4 spd reverse bezel is mounted.

-------------------------------------------------
"Remember Obi-Wan...there is always a bigger fish." ~ Qui Gon Jin