Here is the top end kit ready to put on. Comp street roller cam, specs are 260/266 with .588/.597 lift. The MCH ported heads and I'll be using the Super Victor intake and a Dominator. Comp rocker arms with the 1.50 ratio but I might try a 1.60 rocker arm just for fun. The valve springs will handle up to .650 lift so I might do it, just requires a new set of pushrods and an extra hour or so on the dyno.
I think I'm going to try these Edelbrock head gaskets but I'm worried if the bore is big enough. If it isn't I'll have to come up with another plan. Maybe reuse my Cometics from the last dyno test since I know they work.
Compression is around 12.5 so she'll probably make some power. Should make plenty of torque with the tiny ports and the small cam!