alittle water will evap when run some and heated

done it a few times when I went to deep in the 4x4

flush it run it flush it..

I will say results will vary though...about the 5th time I did it the bearing where done..but not from water...from sand in the muddy water

I have pulled a plug and drained almost 4 gallons of water out of one that sat uncoverd..puled the pan and to my dismay it was not that bad inside for milky slug and rust..rather clean

its been running every day for 3 months now with no problems..

hows your karma?

I would run it till it get up to temp and just change the filter and oil again,then maybe after I drive it a couple miles do it again just to make sure..