Quote:

what cam? At idle how much vacuum & what idle speed, & (as mentioned) what PV & 1st (& easy to do) is to check your float levels.



Its got the Lunati Voodoo 60303 226/234 dur., .494/.513 lift. I was running the stock cam before the rebuild, and it was running pretty good with the carb setup the way it is still. I'll have to get a vacuum gauge for tomorrow, Im without one right now. Its idling around 7-800 rpm in park. Power valve, who knows, but I'd rather not take anything apart before lasting all my other options.

Ill start working on figuring out my float levels and go from there. Thanks guys!

Also should I try bumping my initial up to 15 or so and see what happens?