Originally Posted by skep419
I was looking into buying this rotating assembly 1-98111BI - Scat Engine Rotating Assemblies Summit Scat Kit
Not sure if it would run on 87 with Edelbrock 63cc heads and Felpro 1008's, Voodoo 60403 226 int./234 exh.





I have a 416 stroker with Edelbrock heads “63 cc” that we cc’d at 65 +/-1 cc. And 21cc Icon dish pistons with quench pad. Measured at 9.7:1 compression. It less than .035 quench. And has all chamber edges or potential hot spots deburred including chamber matched to bore. I have the older Comp 274-S cam with 236/241 @050 and .502/511”

I can’t run 87 octane. Maybe if I dialed timing way back.


B8AD309D-5B37-45D2-A3AD-7B3ADC07ACEF.jpeg26E1B20C-E513-41E8-B09B-44D81368B978.jpeg
Last edited by autoxcuda; 11/16/21 12:16 PM.