How much power are you looking for? This setup was good for 900 hp on my 514 inch wedge. Wilson ported the intake and did the fuel rails for me. If you're looking to make a lot of power I'd recommend going that way. I used the Holley 2000 cfm throttle body with 66 lb/hr injectors.

This setup was controlled by a Holley HP unit. Are you going to use a distributor or go with coils near plugs? Rich and I tested the Mopar cam sync and 36-1 trigger wheel on this engine and everything worked great. So if you need a cam sync and a trigger wheel setup then Rich can supply those.