I build a fair amount of 408/416 combos, and what no one mentions here, is the cost to balance the cast 4" cranks. You start getting within striking range of the steel cranks.Most often, your going to need at least one slug of heavy metal in each end. I have NO problem with Scatter cast cranks, but just something to consider.
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
| 
