My plan was to splice the Dakota front frame, install the hemi and NAG1 and get it up and going with a wiring harness from hotwireauto. I thought I would try taking the wiring, computers and shiffter from the magnum and try to start the engine. I cut the wires to stuff like the back lights, wipers, doors, etc. When I hooked it all up and tried to start it, i got a "no bus" error. i think i messed up when i cut the wires going to the steering column. Even though the ignition is in the dash, I.m guessing the cruse control comunicates on the CAN bus. Anyway, it was just a trial. I then sent my computers and shiffter to hotwireauto so they could build me a harness.