Originally Posted By OUTLAWSSAA
Very nice. I hope you have a good baffle under your vacuum fitting. To pull vacuum from that far back on the valve cover is tough.


Yes, it has the Moroso 22635 positive seal vented fitting. I tried it originally in the center of the Indy valley tray at first. Even with this fitting it still filled the catch can on the first pull. Drilled and tapped the fill cap since it was the quick fix while on dyno. Problem solved. I may still move it to the front of the valve cover.

1963 Belvedere 440 Max Wedge Tribute
1970 Charger R/T S.E. 440 Six Pack
1970 Challenger R/T, 528 Hemi
1970 Charger 500 S.E. 440 4 BBL
1970 Plymouth Road Runner 383
1974 Chrysler New Yorker 440
1996 2500 RAM 488 V-10 4X4
2004 3500 Dually Cummins 4x4
2012 Challenger R/T Classic.