I have the SRT4 rear brakes ready and fully detailed. I have a set of 1st Gen Neon rear disc brakes and they appear the same except the knuckle has a speed sensor and the strut mount sticks further inboard which would the SRT to run wider tires so I'll run those.

For the front I have the SRT4 brakes but the bearing and splined hub require modifying the axle end to the 26 spline end, and the spindles strut mount has to be machined to down under an inch thick. The steering ratio is also slightly compromised lock to lock. So I detailed my stock front brakes for now at least, and heres how they look with the planned rims.