Quote:

---

Quote:

---

With your engine I would use the bolts, since that was what it was align honed with. The Studs, because their shank is fatter then the bolts are sure to push those caps out of their alignment. If you want to use the studs, redo the align hone for them.

Im sure your measurements will confirm that. You really don't need the studs though with your combo. But if the blocks still bare, use them and rehone.

---

Thanks for the reply. I don't want to reuse the original bolts, so would I need to re-hone if I get some ARP bolts?

---

Don't know about just using the Arp bolts, but you have a better chance of not having to, vs uising the Studs IMO.

But, your going to measure anyways. You may get lucky as others have stated, Im betting not though, if you use the Studs. Keep us posted as to what you find.