New cam bearings, takes 24 ft lbs to turn cam.

Print Thread

Re: New cam bearings, takes 24 ft lbs to turn cam. [Re: cougar_cat_25] #1610412 05/29/14 08:15 PM 05/29/14 08:15 PM
Joined: Feb 2009 Posts: 110 Grand Forks, ND cougar_cat_25 OP member
cougar_cat_25 OP member Joined: Feb 2009 Posts: 110 Grand Forks, ND	Not to dredge up an old post, but I found a used cam and cut grooves into it. Installed new bearings and shaved them with the new tool. A++ idea, works great.

Entire Thread
Subject	Posted By	Posted
New cam bearings, takes 24 ft lbs to turn cam.	cougar_cat_25	04/22/14 01:27 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Dunnuck Racing	04/22/14 01:34 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	69charger440_6pa	04/22/14 02:09 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Sport440	04/22/14 02:19 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	RapidRobert	04/22/14 02:23 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Crizila	04/22/14 04:49 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Sport440	04/22/14 05:44 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	RapidRobert	04/22/14 04:07 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	moderncylinder	04/23/14 04:32 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Cab_Burge	04/22/14 02:50 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	dvw	04/22/14 03:03 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	n20mstr	04/22/14 03:14 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	MR_P_BODY	04/22/14 03:20 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	cougar_cat_25	04/22/14 03:29 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	n20mstr	04/22/14 03:42 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	383man	04/22/14 04:34 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Cab_Burge	04/22/14 08:31 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	cougar_cat_25	04/22/14 04:02 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Clanton	04/23/14 12:25 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Dyno1	04/23/14 05:52 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Moparnut426	04/23/14 06:50 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	John_Kunkel	04/23/14 07:45 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	onig	04/29/14 05:08 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	B G Racing	04/29/14 03:10 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	tsanchez	04/29/14 08:57 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	cougar_cat_25	04/29/14 02:26 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Cab_Burge	04/29/14 05:02 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Clanton	04/29/14 11:51 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	MR_P_BODY	04/30/14 12:53 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Cab_Burge	04/30/14 01:44 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	MNobody	04/30/14 04:53 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Clanton	04/30/14 02:25 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	cougar_cat_25	05/30/14 12:15 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	roadhazard	05/30/14 04:06 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To