New cam bearings, takes 24 ft lbs to turn cam.

Print Thread

Re: New cam bearings, takes 24 ft lbs to turn cam. [Re: onig] #1610405 04/29/14 11:10 AM 04/29/14 11:10 AM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	Do not remove and reinstall the same cam bearing,you may lose the "crush"fit value and have it spin or move out later.If you do and the fit feels loose use sleeve retainer compound and let it setup. [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Entire Thread
Subject	Posted By	Posted
New cam bearings, takes 24 ft lbs to turn cam.	cougar_cat_25	04/22/14 01:27 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Dunnuck Racing	04/22/14 01:34 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	69charger440_6pa	04/22/14 02:09 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Sport440	04/22/14 02:19 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	RapidRobert	04/22/14 02:23 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Crizila	04/22/14 04:49 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Sport440	04/22/14 05:44 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	RapidRobert	04/22/14 04:07 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	moderncylinder	04/23/14 04:32 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Cab_Burge	04/22/14 02:50 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	dvw	04/22/14 03:03 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	n20mstr	04/22/14 03:14 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	MR_P_BODY	04/22/14 03:20 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	cougar_cat_25	04/22/14 03:29 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	n20mstr	04/22/14 03:42 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	383man	04/22/14 04:34 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Cab_Burge	04/22/14 08:31 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	cougar_cat_25	04/22/14 04:02 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Clanton	04/23/14 12:25 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Dyno1	04/23/14 05:52 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Moparnut426	04/23/14 06:50 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	John_Kunkel	04/23/14 07:45 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	onig	04/29/14 05:08 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	B G Racing	04/29/14 03:10 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	tsanchez	04/29/14 08:57 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	cougar_cat_25	04/29/14 02:26 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Cab_Burge	04/29/14 05:02 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Clanton	04/29/14 11:51 PM
Re: New cam bearings, takes 24 ft lbs to turn cam.	MR_P_BODY	04/30/14 12:53 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Cab_Burge	04/30/14 01:44 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	MNobody	04/30/14 04:53 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	Clanton	04/30/14 02:25 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	cougar_cat_25	05/30/14 12:15 AM
Re: New cam bearings, takes 24 ft lbs to turn cam.	roadhazard	05/30/14 04:06 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To