Quote: On my T/A motor, I ended up shimming the rocker shafts up about 0.025" to gain some push rod to rocker arm clearance. It was a lot cheaper than buying a set of custom length push rods.
Why wouldn't you use the adjusters on the rocker arms and turn them 1/4 to 1/3 turn out to get the clearances needed
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
Why wouldn't you use the adjusters on the rocker arms and turn them 1/4 to 1/3 turn out to get the clearances needed 
