Quote:

Quote:

the Molnar H beam in a 6.250 length with standard Chevy pin weights 512g with 3/8 arp2000 bolts. can I use the 3/8 bolts in this combo or should I be using the 7/16 bolt. looks like the bigger bolt adds a lot of weight. pistons will be between 400-450G.


If you go to a Mopar spec piston, then you won't have to use that long rod....




Lot of people like/ prefer the long rod with 4 inch crank. I used 6.300 Compstar rods which worked extremely well.


69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, low 10.30’s 1/4
1.41 best 60 foot
6.56 at 104.17