Quote:

---

All other rockers look good, no slop, no signs of heat.

I'm looking at getting a set of H-S's and not looking back. My question is is it worth the nominal hit in power to drop down to 1.5's... The cam was ground with 1.6's in mind. It is also not a fast ramp design.

---

My old set(20+Yrs)1.5 Harland Sharps checked out to have 1.56 ratio at the retainers, my newer H.S. 1.6 ratio rockers checked out to have 1.65 at the retainers I bought a set of single shaft T&D and they varied a little on the ratios at the retainers, I saw around .030 differences in lift at the retainers on both the T&D and H.S.