Quote:

Tim (70Dart360) R.I.P. Told me just to use the crank type valve spring compressor they sell at most every parts store,along with rope and a magnet for the keepers. I'm getting ready to do it next week while off work.

Any serious drawbacks or tips?

P.S. -I don't have shop air for that trick or a welder to make a tool from a rocker.



Depending on how stiff the springs are, that tool can be a bit difficult to turn.
So, I welded an old 3/4" half-inch drive socket onto the star wheel.
Now I can use a ratchet wrench to turn the tool and it makes the job a whole lot easier.

Your life is not my fault.
My life is none of your business.

Speech is free only if you agree with those in control.