Ok ladder bars are in and done, I am having the diagonal bar tig welded so that will be a few days before I can go get it. The install is only bolted in not tightened as it may come back out.

The coilovers and brackets were installed plumb in both planes, I have a spacer bar installed during the build but it is at what should be ride height.

I have a few other questions in regards to the build and I will accompany with pictures.

1) What is the best way to seal the upper shock mount in the trunk and still access it for removal or do you you guys leave it open around them, I can build a plate to minimize the gap around the coilover