Perhaps I miscommunicated what I meant. What I mean is that I don't believe he cleaned out the galleys. The block was clean when I picked it up, and I believe he cleaned it up after the machine work, but I don't believe he removed the galley plugs and brushed out the oil galleys. The plugs appeared to have new silicone around them when I bought the block, and it appeared that they were cleaned when the block was bored. I could be wrong about that, as I did not confirm the galleys to be clean. He very well could have done it as standard practice, but since he did not bore or assemble, I assumed he did only what I asked for. My bad, as I agree that I'm ultimately responsible.

I'll definately clean it out good, now!