Quote:

---

useing you watch dial as reference. Here is the question , with a 116" whl base. if the angle of the top link rear hole is say @11 and the front hole @ 2 , then with the bottom link rear hole @ say 7 and the front hole @4. now useing these angles how do you think this setting would react. and just discuss how you set your top and bottom links and how the different setting would react to different adjustment. thanks [/quote

How are you getting 2 on the front top bar and front
bottom at 4... you messed up some numbers
EDIT
For discussion we will say that as a general rule
of thump the bottom bar is the height of the IC and
the top is length... think of it this way... if you
leave the bottom bar along and you lower the top front...
what is occurring... it is shortening the IC... now
if you move the bottom front it raises the IC..
also iif you move the rear bars away from the axle
centerline you gain leverage and will tend to pull
wheel stands easier .... also on the IC you need to
know where the CG of the car is.... that way the IC
will be just behind it to pick up the most weight