I'm dropping my engine off tomorrow to be set up on
the dyno... should be running on Wednesday
418 ci
.040 over 340
4" stroke
Eagle H-beam rods 6.125"(chevy ends)
Diamond pistons W/22 cc dish
1/16, 1/16/ 3/16 rings standard oil ring
10.9 compression
.039 Felpro head gaskets
W-5 heads ported
flow 310 @ .700
cam is MP solid roller
105 LSA installed at 103
260/270 at .050
.640/.640 lift
TD rockers 1.5
M-1 large port intake match ported to the heads
gonna run 2 different carbs
850 dp and a 1050 dom with adapter
custom 1 7/8" straight headers 3.5 collectors
custom 8 qt oil pan with remote filter
this will run pump gas... on the dyno
will run 93 octane
this is mainly stuff I had in the shop
so its not perfect... the only thing I
had to buy was pistons and rings

so take a guess... I have a HP I'm shooting
for.. I'll see if it makes it