Cutters for porting cast iron heads?

Print Thread

Re: Cutters for porting cast iron heads? [Re: dodgeboy11] #1105798 11/05/11 01:46 AM 11/05/11 01:46 AM
Joined: Dec 2008 Posts: 176 Rome, GA G GTXX member
GTXX member G Joined: Dec 2008 Posts: 176 Rome, GA	Quote: http://www.ruffstuff.com/pages/carbide.html one of the best things on that site is one of the cheapest, a split mandrel. get a roll of 60 grit cloth and it will save you a ton of cash from all of the cartridge rolls that you won't need.

Entire Thread
Subject	Posted By	Posted
Cutters for porting cast iron heads?	lahatte	11/02/11 04:58 AM
Re: Cutters for porting cast iron heads?	Cab_Burge	11/02/11 05:05 AM
Re: Cutters for porting cast iron heads?	dOoC	11/02/11 05:10 AM
Re: Cutters for porting cast iron heads?	dodgeboy11	11/02/11 05:33 AM
Re: Cutters for porting cast iron heads?	lahatte	11/02/11 05:55 AM
Re: Cutters for porting cast iron heads?	tubtar	11/02/11 02:26 PM
Re: Cutters for porting cast iron heads?	WILD BILL	11/02/11 03:17 PM
Re: Cutters for porting cast iron heads?	JohnRR	11/02/11 04:15 PM
Re: Cutters for porting cast iron heads?	MR_P_BODY	11/02/11 04:37 PM
Re: Cutters for porting cast iron heads?	mr_340	11/02/11 06:22 PM
Re: Cutters for porting cast iron heads?	lahatte	11/03/11 01:19 AM
Re: Cutters for porting cast iron heads?	SteveA	11/04/11 03:02 PM
Re: Cutters for porting cast iron heads?	Stanton	11/04/11 05:21 PM
Re: Cutters for porting cast iron heads?	Cab_Burge	11/05/11 05:00 AM
Re: Cutters for porting cast iron heads?	GTXX	11/05/11 05:28 AM
Re: Cutters for porting cast iron heads?	dodgeboy11	11/06/11 06:15 AM
Re: Cutters for porting cast iron heads?	wildcargo	11/06/11 03:28 PM
Re: Cutters for porting cast iron heads?	GTXX	11/06/11 05:34 PM
Re: Cutters for porting cast iron heads?	GTXX	11/05/11 05:46 AM
Re: Cutters for porting cast iron heads?	lahatte	11/05/11 06:16 AM
Re: Cutters for porting cast iron heads?	tubtar	11/05/11 05:34 PM
Re: Cutters for porting cast iron heads?	Twin Turbo Mower	11/02/11 05:23 AM

Hop To