Cutters for porting cast iron heads?

Print Thread

Re: Cutters for porting cast iron heads? [Re: dodgeboy11] #1105787 11/02/11 01:55 AM 11/02/11 01:55 AM
Joined: Dec 2010 Posts: 392 Mississippi lahatte OP enthusiast
lahatte OP enthusiast Joined: Dec 2010 Posts: 392 Mississippi	Indeed. That metal dust is some tough stuff to breathe. I'm curious, why do you not want to spin up the cutter before touching the surface? Thanks.

Entire Thread
Subject	Posted By	Posted
Cutters for porting cast iron heads?	lahatte	11/02/11 04:58 AM
Re: Cutters for porting cast iron heads?	Cab_Burge	11/02/11 05:05 AM
Re: Cutters for porting cast iron heads?	dOoC	11/02/11 05:10 AM
Re: Cutters for porting cast iron heads?	dodgeboy11	11/02/11 05:33 AM
Re: Cutters for porting cast iron heads?	lahatte	11/02/11 05:55 AM
Re: Cutters for porting cast iron heads?	tubtar	11/02/11 02:26 PM
Re: Cutters for porting cast iron heads?	WILD BILL	11/02/11 03:17 PM
Re: Cutters for porting cast iron heads?	JohnRR	11/02/11 04:15 PM
Re: Cutters for porting cast iron heads?	MR_P_BODY	11/02/11 04:37 PM
Re: Cutters for porting cast iron heads?	mr_340	11/02/11 06:22 PM
Re: Cutters for porting cast iron heads?	lahatte	11/03/11 01:19 AM
Re: Cutters for porting cast iron heads?	SteveA	11/04/11 03:02 PM
Re: Cutters for porting cast iron heads?	Stanton	11/04/11 05:21 PM
Re: Cutters for porting cast iron heads?	Cab_Burge	11/05/11 05:00 AM
Re: Cutters for porting cast iron heads?	GTXX	11/05/11 05:28 AM
Re: Cutters for porting cast iron heads?	dodgeboy11	11/06/11 06:15 AM
Re: Cutters for porting cast iron heads?	wildcargo	11/06/11 03:28 PM
Re: Cutters for porting cast iron heads?	GTXX	11/06/11 05:34 PM
Re: Cutters for porting cast iron heads?	GTXX	11/05/11 05:46 AM
Re: Cutters for porting cast iron heads?	lahatte	11/05/11 06:16 AM
Re: Cutters for porting cast iron heads?	tubtar	11/05/11 05:34 PM
Re: Cutters for porting cast iron heads?	Twin Turbo Mower	11/02/11 05:23 AM

Hop To