Cutters for porting cast iron heads?

Print Thread

Cutters for porting cast iron heads? #1105782 11/02/11 12:58 AM 11/02/11 12:58 AM
Joined: Dec 2010 Posts: 392 Mississippi lahatte OP enthusiast
lahatte OP enthusiast Joined: Dec 2010 Posts: 392 Mississippi	Any good/bad experiences with cutting tools and sanding tools for porting on cast iron heads? What cutters have you found work weel? What styles? Thanks.

Entire Thread
Subject	Posted By	Posted
Cutters for porting cast iron heads?	lahatte	11/02/11 04:58 AM
Re: Cutters for porting cast iron heads?	Cab_Burge	11/02/11 05:05 AM
Re: Cutters for porting cast iron heads?	BeEtLeJuIcE !	11/02/11 05:10 AM
Re: Cutters for porting cast iron heads?	dodgeboy11	11/02/11 05:33 AM
Re: Cutters for porting cast iron heads?	lahatte	11/02/11 05:55 AM
Re: Cutters for porting cast iron heads?	tubtar	11/02/11 02:26 PM
Re: Cutters for porting cast iron heads?	WILD BILL	11/02/11 03:17 PM
Re: Cutters for porting cast iron heads?	JohnRR	11/02/11 04:15 PM
Re: Cutters for porting cast iron heads?	MR_P_BODY	11/02/11 04:37 PM
Re: Cutters for porting cast iron heads?	mr_340	11/02/11 06:22 PM
Re: Cutters for porting cast iron heads?	lahatte	11/03/11 01:19 AM
Re: Cutters for porting cast iron heads?	SteveA	11/04/11 03:02 PM
Re: Cutters for porting cast iron heads?	Stanton	11/04/11 05:21 PM
Re: Cutters for porting cast iron heads?	Cab_Burge	11/05/11 05:00 AM
Re: Cutters for porting cast iron heads?	GTXX	11/05/11 05:28 AM
Re: Cutters for porting cast iron heads?	dodgeboy11	11/06/11 06:15 AM
Re: Cutters for porting cast iron heads?	wildcargo	11/06/11 03:28 PM
Re: Cutters for porting cast iron heads?	GTXX	11/06/11 05:34 PM
Re: Cutters for porting cast iron heads?	GTXX	11/05/11 05:46 AM
Re: Cutters for porting cast iron heads?	lahatte	11/05/11 06:16 AM
Re: Cutters for porting cast iron heads?	tubtar	11/05/11 05:34 PM
Re: Cutters for porting cast iron heads?	Twin Turbo Mower	11/02/11 05:23 AM

Hop To