Quote:
Quote:
Quote:
Quote:
i just mocked my rockers up to check the cam in the engine and my pushrods are way short
does the eagle head take longer pushrods? or do the lifters collapse without oil in them? i'm thinking i need longer PRs nevermind i just checked mopar wholesale and pushrods are diffrent starting 09
Ray, Are you using a factory 6.1 short block ie pistons, rods and crank?
its a 426 small dish with valve reliefs JE piston. bought used
Gotcha, Zero deck? Reason I asked is with stock pistons, they're between .010" and .015" out of the hole. Most that I checked were .010". Using an Eagle head with a factory 6.1 short block might require a Cometic .051" head gasket.... I don't know the spec's for either of the VVT Hemi Gen 4 factory head gaskets. Hopefully Zippy will chime in.
Zero deck. the head gasket that came off the engine is 040
Gen 3 power 6.22@110, 9.85@135 Follow @g3hemiswap on instagram
performance only racing, CRT, ultimate converter, superior design concepts, ThumperCarbs
|