Quote:

---

Quote:

---

Quote:

---

Quote:

---

i just mocked my rockers up to check the cam in the engine and my pushrods are way short

does the eagle head take longer pushrods? or do the lifters collapse without oil in them? i'm thinking i need longer PRs

nevermind
i just checked mopar wholesale and pushrods are diffrent starting 09

---

Ray, Are you using a factory 6.1 short block ie pistons, rods and crank?

---

its a 426 small dish with valve reliefs JE piston. bought used

---

Gotcha, Zero deck? Reason I asked is with stock pistons, they're between .010" and .015" out of the hole. Most that I checked were .010". Using an Eagle head with a factory 6.1 short block might require a Cometic .051" head gasket.... I don't know the spec's for either of the VVT Hemi Gen 4 factory head gaskets. Hopefully Zippy will chime in.

---