airgrabber air cleaner - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum airgrabber air cleaner

Print Thread

airgrabber air cleaner #428806 08/04/09 09:56 PM 08/04/09 09:56 PM
A Anonymous OP Unregistered
Anonymous OP Unregistered A	Is the sixpac filter and lid the same,will it fit on the airgrabber 4bbl aircleaner? THANKS EDDIE B

Re: airgrabber air cleaner #428807 08/04/09 10:15 PM 08/04/09 10:15 PM
Joined: Jun 2003 Posts: 21,406 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,406 It's a dry heat	filters are the same ( on 69's with 4 barrels) lids are different for 6 pack versus 4 barrel ( 1970 and later 4 barrel is a round lid )

Re: airgrabber air cleaner #428808 08/04/09 10:33 PM 08/04/09 10:33 PM
Joined: Jan 2007 Posts: 160 Florida H hemisurfer member
hemisurfer member H Joined: Jan 2007 Posts: 160 Florida	I use a 1970 440 6 pack base with a six pack lid on a 440 six pack motor installed in a 1969 air grabber 383 car. It all works together and looks very factory. Most neophytes don't even know it's a six pack when they look at it. Even left the 383 emblems to complete the sleeper effect. BTW if you have any real HP behind your motor I would suggest using a torque strap of some kind. If you bust a motor mount without it you will rip up some very expensive air grabber ducting. Chris

Re: airgrabber air cleaner #428809 08/05/09 10:03 AM 08/05/09 10:03 AM
A Anonymous OP Unregistered
Anonymous OP Unregistered A	spacing of the wing nuts are different between 4bbl and six pack lids. that is good advice about a torque strap.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1