Posted By: Anonymous
airgrabber air cleaner - 08/05/09 01:56 AM
Is the sixpac filter and lid the same,will it fit on the airgrabber 4bbl aircleaner?
THANKS EDDIE B
Posted By: gtx6970
Re: airgrabber air cleaner - 08/05/09 02:15 AM
filters are the same ( on 69's with 4 barrels)
lids are different for 6 pack versus 4 barrel
( 1970 and later 4 barrel is a round lid )
Posted By: hemisurfer
Re: airgrabber air cleaner - 08/05/09 02:33 AM
I use a 1970 440 6 pack base with a six pack lid on a 440 six pack motor installed in a 1969 air grabber 383 car. It all works together and looks very factory. Most neophytes don't even know it's a six pack when they look at it. Even left the 383 emblems to complete the sleeper effect.
BTW if you have any real HP behind your motor I would suggest using a torque strap of some kind. If you bust a motor mount without it you will rip up some very expensive air grabber ducting.
Posted By: Anonymous
Re: airgrabber air cleaner - 08/05/09 02:03 PM
spacing of the wing nuts are different between 4bbl and six pack lids. that is good advice about a torque strap.