mp solid lifter seat height vs comp cams solid lifter seat h - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech mp solid lifter seat height vs comp cams solid lifter seat h

Print Thread

mp solid lifter seat height vs comp cams solid lifter seat h #1977194 12/27/15 04:00 PM 12/27/15 04:00 PM
Joined: Nov 2003 Posts: 6,293 Rock Springs Bob_Coomer OP master
Bob_Coomer OP master Joined: Nov 2003 Posts: 6,293 Rock Springs	Hey guys.. been a awhile! Have a comp cams solid flat tapped in the engine now, and want to buy a new model purples shaft 528 solid. Just don't wanna buy new pushrods Last edited by Bob_Coomer; 12/27/15 04:01 PM. [color:"red"]65 Hemi Belvedere coming soon [/color] [color:"#00FF00"]557" Indy engine 1.07 60ft 144mph in the 8th 2100 lbs package [/color]

Re: mp solid lifter seat height vs comp cams solid lifter seat h [Re: Bob_Coomer] #1977257 12/27/15 05:37 PM 12/27/15 05:37 PM
Joined: Jan 2003 Posts: 31,002 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,002 Oregon	No guarantee that you won't need new pushrods, just depends on which vendor MP is using for lifters. If they use the same exact lifter dimensions as Comp then you'll get lucky, otherwise you might need new pushrods.

Re: mp solid lifter seat height vs comp cams solid lifter seat h [Re: Bob_Coomer] #1977339 12/27/15 07:36 PM 12/27/15 07:36 PM
Joined: Mar 2006 Posts: 9,827 MI, usa dvw master
dvw master Joined: Mar 2006 Posts: 9,827 MI, usa	Not many lifter manufacturers now. My bet is they'e all the same. Hydraulic and solid are different heights. But I'll bet all solids are the same. If your worried why not just get your lifters from Comp? Then you'll match what you have. Doug

Re: mp solid lifter seat height vs comp cams solid lifter seat h [Re: Bob_Coomer] #1978092 12/28/15 08:25 PM 12/28/15 08:25 PM
Joined: Jan 2003 Posts: 6,531 Jacksonville, FL Chris2581 master
Chris2581 master Joined: Jan 2003 Posts: 6,531 Jacksonville, FL	Johnson Hy-Lift makes the MP lifters. Stanadyne was used before that,LONG ago,but they stopped making them.I'd be willing to bet Johnson Hy-Lift makes Comp lifters too. Nautilus Racing- We use Superformance gaskets and Turbo Action converters/products.

Re: mp solid lifter seat height vs comp cams solid lifter seat h [Re: Bob_Coomer] #3169488 08/21/23 05:46 PM 08/21/23 05:46 PM
Joined: Jan 2006 Posts: 81 neche, ND 5 526 member
526 member 5 Joined: Jan 2006 Posts: 81 neche, ND	Hey bob trying t get a hold of u fr a question I will leave it in ur mailbox cool thc

Re: mp solid lifter seat height vs comp cams solid lifter seat h [Re: 526] #3169496 08/21/23 06:04 PM 08/21/23 06:04 PM
Joined: Aug 2019 Posts: 9,434 Super Spudsville Mr PotatoHead Half Baked
Mr PotatoHead Half Baked Joined: Aug 2019 Posts: 9,434 Super Spudsville	The MP small block solids and the small block comp solids I have are the same in every way. STOP POTATO HATE!

Re: mp solid lifter seat height vs comp cams solid lifter seat h [Re: Mr PotatoHead] #3169577 08/22/23 02:04 AM 08/22/23 02:04 AM
Joined: Aug 2003 Posts: 43,127 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,127 Bend,OR USA	Mopar lifters, both hydraulic and solids had two different cup heights, 1952 to 1967 had a lower cup height than the 1967 and later lifters have. OP, how about having your current lifter set bottoms reconditioned by a good cam regrind company? Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1