mp solid lifter seat height vs comp cams solid lifter seat h

Posted By: Bob_Coomer

mp solid lifter seat height vs comp cams solid lifter seat h - 12/27/15 08:00 PM

Hey guys.. been a awhile!

Have a comp cams solid flat tapped in the engine now, and want to buy a new model purples shaft 528 solid. Just don't wanna buy new pushrods

Posted By: AndyF

Re: mp solid lifter seat height vs comp cams solid lifter seat h - 12/27/15 09:37 PM

No guarantee that you won't need new pushrods, just depends on which vendor MP is using for lifters. If they use the same exact lifter dimensions as Comp then you'll get lucky, otherwise you might need new pushrods.

Posted By: dvw

Re: mp solid lifter seat height vs comp cams solid lifter seat h - 12/27/15 11:36 PM

Not many lifter manufacturers now. My bet is they'e all the same. Hydraulic and solid are different heights. But I'll bet all solids are the same. If your worried why not just get your lifters from Comp? Then you'll match what you have.
Doug

Posted By: Chris2581

Re: mp solid lifter seat height vs comp cams solid lifter seat h - 12/29/15 12:25 AM

Johnson Hy-Lift makes the MP lifters. Stanadyne was used before that,LONG ago,but they stopped making them.I'd be willing to bet Johnson Hy-Lift makes Comp lifters too.

Posted By: 526

Re: mp solid lifter seat height vs comp cams solid lifter seat h - 08/21/23 09:46 PM

Hey bob trying t get a hold of u fr a question I will leave it in ur mailbox cool thc

Posted By: Mr PotatoHead

Re: mp solid lifter seat height vs comp cams solid lifter seat h - 08/21/23 10:04 PM

The MP small block solids and the small block comp solids I have are the same in every way.

Posted By: Cab_Burge

Re: mp solid lifter seat height vs comp cams solid lifter seat h - 08/22/23 06:04 AM

Mopar lifters, both hydraulic and solids had two different cup heights, 1952 to 1967 had a lower cup height than the 1967 and later lifters have.
OP, how about having your current lifter set bottoms reconditioned by a good cam regrind company?