Re: Indy SR or INDY-1, how to tell what I have
[Re: Moparnut426]
#3080759
09/26/22 09:54 AM
09/26/22 09:54 AM
|
Joined: Aug 2005
Posts: 4,101 Yes
sixpakdodge
master
|
master
Joined: Aug 2005
Posts: 4,101
Yes
|
I thought the SR used all stock top end components, but the -1 uses offset rockers. Correct. The SR can also use the offset rocker though. As far as markings...I think only if they've been CNC'ed. Otherwise you're at the mercy of measuring everything to try and figure out what they are. Both heads use the same studs/bolts.
|
|
|
Re: Indy SR or INDY-1, how to tell what I have
[Re: sixpakdodge]
#3080767
09/26/22 10:16 AM
09/26/22 10:16 AM
|
Joined: Mar 2007
Posts: 12,008 Finally a HUSKER again
Moparnut426
OP
I Live Here
|
OP
I Live Here
Joined: Mar 2007
Posts: 12,008
Finally a HUSKER again
|
I thought the SR used all stock top end components, but the -1 uses offset rockers. Correct. The SR can also use the offset rocker though. As far as markings...I think only if they've been CNC'ed. Otherwise you're at the mercy of measuring everything to try and figure out what they are. Both heads use the same studs/bolts. So I can run the standard rockers on a SR or -1 head?
|
|
|
Re: Indy SR or INDY-1, how to tell what I have
[Re: sixpakdodge]
#3080773
09/26/22 10:22 AM
09/26/22 10:22 AM
|
Joined: Mar 2007
Posts: 12,008 Finally a HUSKER again
Moparnut426
OP
I Live Here
|
OP
I Live Here
Joined: Mar 2007
Posts: 12,008
Finally a HUSKER again
|
I thought the SR used all stock top end components, but the -1 uses offset rockers. Correct. The SR can also use the offset rocker though. As far as markings...I think only if they've been CNC'ed. Otherwise you're at the mercy of measuring everything to try and figure out what they are. Both heads use the same studs/bolts. Would a picture help? Ive got 3, nothing into the intake ports though
|
|
|
Re: Indy SR or INDY-1, how to tell what I have
[Re: Moparnut426]
#3080809
09/26/22 12:11 PM
09/26/22 12:11 PM
|
Joined: Jan 2003
Posts: 10,022 MN
JERICOGTX
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,022
MN
|
Thanks guys!!
Ill get the expensive rockers coming LOL
Do I go ahead and use the "indy" specific head studs also then? Mancini shows 2 different ones I assume the deck is thicker on a -1 The 572-13, and 600-13 heads use taller studs. The 440-1's and SR, use the same set, and are taller than stock type heads.
69 GTX
68 Road Runner
|
|
|
|
|