|
TF 240 cnc program
#3072625
08/30/22 02:32 PM
08/30/22 02:32 PM
|
Joined: Mar 2008
Posts: 89 Cedar Rapids, IA
69Mcode440
OP
member
|
OP
member
Joined: Mar 2008
Posts: 89
Cedar Rapids, IA
|
Does anyone have a cnc program to take the 240 heads to max wedge?
Also need my roller cam repaired. Who could I send it to. It's a Howards..It looks a little rough.
Thanks, Mike
Mike 69 440 Cuda 71 Dart drag car 70 Duster drag car Best et 9.32, 145.9 mph 2019 Ram 2500 4x4
|
|
|
Re: TF 240 cnc program
[Re: 605ply]
#3072674
08/30/22 04:19 PM
08/30/22 04:19 PM
|
Joined: Feb 2005
Posts: 20,173 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,173
PA.
|
...sell your 240's and buy 270's I hear they recently went up 200.00 per head.
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: TF 240 cnc program
[Re: 605ply]
#3072735
08/30/22 06:18 PM
08/30/22 06:18 PM
|
Joined: Dec 2013
Posts: 4,672 Wichita
GY3
master
|
master
Joined: Dec 2013
Posts: 4,672
Wichita
|
440Source has 270's in stock.
'63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.
|
|
|
Re: TF 240 cnc program
[Re: 69Mcode440]
#3072865
08/31/22 10:30 AM
08/31/22 10:30 AM
|
Joined: Dec 2021
Posts: 1,125 Loudoun County, VA
Brad_Haak
super stock
|
super stock
Joined: Dec 2021
Posts: 1,125
Loudoun County, VA
|
Does anyone have a cnc program to take the 240 heads to max wedge?
Also need my roller cam repaired. Who could I send it to. It's a Howards..It looks a little rough.
Plenty of competent head porters can open a standard port to MW; doesn't require a CNC program. Have you contacted Howard's about the cam? Depending upon the issue, it may not be cost-effective to try and repair it.
2021 Challenger 6.4L Scat Pack 1320 100% stock: 1.680, 11.894 at 113.75 (DA 175 ft) weight reduction, wheels, tires, Hellcat air box: 1.661, 11.686 at 115.97 (DA 710 ft)
1973 Challenger 452 ci street/strip [2008] pump gas, DOT radials: 1.454, 10.523 at 126.44 (DA 514 ft)
|
|
|
Re: TF 240 cnc program
[Re: Brad_Haak]
#3073014
08/31/22 07:28 PM
08/31/22 07:28 PM
|
Joined: Mar 2008
Posts: 89 Cedar Rapids, IA
69Mcode440
OP
member
|
OP
member
Joined: Mar 2008
Posts: 89
Cedar Rapids, IA
|
Thanks for the ideas.
Mike
Mike 69 440 Cuda 71 Dart drag car 70 Duster drag car Best et 9.32, 145.9 mph 2019 Ram 2500 4x4
|
|
|
|
|
|