TF 240 cnc program - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech TF 240 cnc program

Print Thread

TF 240 cnc program #3072625 08/30/22 02:32 PM 08/30/22 02:32 PM
Joined: Mar 2008 Posts: 89 Cedar Rapids, IA 6 69Mcode440 OP member
69Mcode440 OP member 6 Joined: Mar 2008 Posts: 89 Cedar Rapids, IA	Does anyone have a cnc program to take the 240 heads to max wedge? Also need my roller cam repaired. Who could I send it to. It's a Howards..It looks a little rough. Thanks, Mike Mike 69 440 Cuda 71 Dart drag car 70 Duster drag car Best et 9.32, 145.9 mph 2019 Ram 2500 4x4

Re: TF 240 cnc program [Re: 69Mcode440] #3072670 08/30/22 04:14 PM 08/30/22 04:14 PM
Joined: Aug 2008 Posts: 85 Alberta,Canada 6 605ply member
605ply member 6 Joined: Aug 2008 Posts: 85 Alberta,Canada	...sell your 240's and buy 270's

Re: TF 240 cnc program [Re: 605ply] #3072674 08/30/22 04:19 PM 08/30/22 04:19 PM
Joined: Feb 2005 Posts: 20,173 PA. pittsburghracer "Little"John
pittsburghracer "Little"John Joined: Feb 2005 Posts: 20,173 PA.	Originally Posted by 605ply ...sell your 240's and buy 270's I hear they recently went up 200.00 per head. 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27 Livin and lovin life one day at a time

Re: TF 240 cnc program [Re: pittsburghracer] #3072724 08/30/22 05:48 PM 08/30/22 05:48 PM
Joined: Aug 2008 Posts: 85 Alberta,Canada 6 605ply member
605ply member 6 Joined: Aug 2008 Posts: 85 Alberta,Canada	..no stock at summit too,I suppose there might be a special case

Re: TF 240 cnc program [Re: 605ply] #3072735 08/30/22 06:18 PM 08/30/22 06:18 PM
Joined: Dec 2013 Posts: 4,672 Wichita G GY3 master
GY3 master G Joined: Dec 2013 Posts: 4,672 Wichita	440Source has 270's in stock. '63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.

Re: TF 240 cnc program [Re: GY3] #3072787 08/30/22 10:41 PM 08/30/22 10:41 PM
Joined: Jun 2004 Posts: 674 Ripley B BryanRad mopar
BryanRad mopar B Joined: Jun 2004 Posts: 674 Ripley	Yep, Summit raised them at same time they were handing 10% off out at the Nats like Candy..... New price is almost dead on old with the 10% off.....

Re: TF 240 cnc program [Re: 69Mcode440] #3072865 08/31/22 10:30 AM 08/31/22 10:30 AM
Joined: Dec 2021 Posts: 1,126 Loudoun County, VA Brad_Haak super stock
Brad_Haak super stock Joined: Dec 2021 Posts: 1,126 Loudoun County, VA	Originally Posted by 69Mcode440 Does anyone have a cnc program to take the 240 heads to max wedge? Also need my roller cam repaired. Who could I send it to. It's a Howards..It looks a little rough. Plenty of competent head porters can open a standard port to MW; doesn't require a CNC program. Have you contacted Howard's about the cam? Depending upon the issue, it may not be cost-effective to try and repair it. 2021 Challenger 6.4L Scat Pack 1320 100% stock: 1.680, 11.894 at 113.75 (DA 175 ft) weight reduction, wheels, tires, Hellcat air box: 1.661, 11.686 at 115.97 (DA 710 ft) 1973 Challenger 452 ci street/strip [2008] pump gas, DOT radials: 1.454, 10.523 at 126.44 (DA 514 ft)

Re: TF 240 cnc program [Re: Brad_Haak] #3073014 08/31/22 07:28 PM 08/31/22 07:28 PM
Joined: Mar 2008 Posts: 89 Cedar Rapids, IA 6 69Mcode440 OP member
69Mcode440 OP member 6 Joined: Mar 2008 Posts: 89 Cedar Rapids, IA	Thanks for the ideas. Mike Mike 69 440 Cuda 71 Dart drag car 70 Duster drag car Best et 9.32, 145.9 mph 2019 Ram 2500 4x4

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1