Re: Water pump and housing sealant
[Re: 6PAX]
#3061307
07/21/22 12:27 PM
07/21/22 12:27 PM
|
Joined: Dec 2006
Posts: 2,118 Byron, NY
W.I.N. Racing
top fuel
|
top fuel
Joined: Dec 2006
Posts: 2,118
Byron, NY
|
None if it we're mine. if anything I would use Hi-tack or Indian head shellac,
'01 P1500, Blown/Inj BAE,/Veney ,Bruno/CS2,Dana 60 '01 Dodge 3500 S Cummins Auto, Fresh air kit, 4" Exhaust, '05 Dodge Magnum R/T - Too Much to list '60 Willys CJ5 '01 International LPX - Project,DT466, Allison '64 Plymouth Valiant, Inj 528 Hemi, 2spd
|
|
|
Re: Water pump and housing sealant
[Re: 6PAX]
#3061335
07/21/22 01:16 PM
07/21/22 01:16 PM
|
Joined: Jan 2003
Posts: 13,384 Marion, South Carolina [><]
an8sec70cuda
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 13,384
Marion, South Carolina [><]
|
Everyone has their favorite. I use a light coat of ultra grey silicone on the gasket. If using a motorplate, I don't use gaskets at all. Just a light coat of ultra grey silicone.
CHIP '70 hemicuda, 575" Hemi, 727, Dana 60 '69 road runner, 440-6, 18 spline 4 speed, Dana 60 '71 Demon, 340, low gear 904, 8.75 '73 Chrysler New Yorker, 440, 727, 8.75 '90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt '06 GMC 2500HD LBZ Duramax
|
|
|
Re: Water pump and housing sealant
[Re: an8sec70cuda]
#3061364
07/21/22 02:24 PM
07/21/22 02:24 PM
|
Joined: Jan 2003
Posts: 10,044 MN
JERICOGTX
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 10,044
MN
|
I use Superformance Gaskets, and just install them dry.
69 GTX
68 Road Runner
|
|
|
Re: Water pump and housing sealant
[Re: JERICOGTX]
#3061369
07/21/22 02:32 PM
07/21/22 02:32 PM
|
Joined: Mar 2003
Posts: 2,524 PA
moparacer
master
|
master
Joined: Mar 2003
Posts: 2,524
PA
|
Been using ultra grey for years between the pump, motor plate and block.
The ultra black would be just as good.
67 Barracuda street/bracket car 11.27-119 68 Dart 502 BB 8.70s-152 414 cid SB Dragster 7.65-174
|
|
|
Re: Water pump and housing sealant
[Re: Cab_Burge]
#3061502
07/21/22 08:26 PM
07/21/22 08:26 PM
|
Joined: Jan 2003
Posts: 5,446 So Cal
Sinitro
master
|
master
Joined: Jan 2003
Posts: 5,446
So Cal
|
1 suggestion... Get some longer threaded studs or cut off the nut head from screws.. Then screw these into the block when installing the water pump housing and seal they act as guides.. Makes the job much easier without having the gasket slip down. Then 1 by 1 unscrew the studs and install the proper bolts and torque things down.. Just my $0.02...
|
|
|
Re: Water pump and housing sealant
[Re: Sinitro]
#3061514
07/21/22 09:06 PM
07/21/22 09:06 PM
|
Joined: Nov 2003
Posts: 36,041 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,041
Lincoln Nebraska
|
1 suggestion... Get some longer threaded studs or cut off the nut head from screws.. Then screw these into the block when installing the water pump housing and seal they act as guides.. Makes the job much easier without having the gasket slip down. Then 1 by 1 unscrew the studs and install the proper bolts and torque things down.. Just my $0.02... I totally agree, I do this on other areas including the heads
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: Water pump and housing sealant
[Re: 6PAX]
#3061525
07/21/22 10:24 PM
07/21/22 10:24 PM
|
Joined: Aug 2003
Posts: 43,282 Bend,OR USA
Cab_Burge
I Win
|
I Win
Joined: Aug 2003
Posts: 43,282
Bend,OR USA
|
Oil or Anti seize up: All the BB Mopar bolt holes for the timing cover and water pump housing mounting bolt holes in the block are blind, they do not go into the water jackets: scope:
Last edited by Cab_Burge; 07/21/22 10:26 PM.
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
|
|
|
Re: Water pump and housing sealant
[Re: 6PAX]
#3061529
07/21/22 10:43 PM
07/21/22 10:43 PM
|
Joined: Jan 2003
Posts: 31,066 Oregon
AndyF
I Win
|
I Win
Joined: Jan 2003
Posts: 31,066
Oregon
|
I'm using Fel Pro gaskets. I also meant to ask, should I put anything on the bolt threads? I use ARP 12 point stainless for all builds and put a thin coat of ARP bolt lube on the threads. ARP stainless are the only bolts I use unless the application requires something specific such as rod bolts.
|
|
|
|
|