|
Re: Ebody R/T hood, 440, and Torker II
[Re: Larry]
#2709508
10/23/19 12:50 PM
10/23/19 12:50 PM
|
Joined: Jul 2004
Posts: 4,732 Watertown, WI
MikeyT
master
|
master
Joined: Jul 2004
Posts: 4,732
Watertown, WI
|
hummm it will be close but I ran a dual snorkel on my 1972 road runner with a 440 and Torker II intake and didn't have any issues with it. I think it should work but it will be close.
1969 Dodge Dart Swinger
|
|
|
Re: Ebody R/T hood, 440, and Torker II
[Re: Larry]
#2710977
10/29/19 05:31 PM
10/29/19 05:31 PM
|
Joined: Feb 2003
Posts: 1,142 Tucson, AZ
cruzin
super stock
|
super stock
Joined: Feb 2003
Posts: 1,142
Tucson, AZ
|
Don't have this exact combo. However, according to E-Brock's specs, the Torker II carb pad height is: 4.67" front / 5.20" rear and is 1.7" taller than stock. The more popular, Performer RPB intake manifold pad height is 5.35". Perhaps someone using a Performer RPM can chime in. If you currently have the stock configuration, check to see if you have the 1.7" clearance.
|
|
|
|
|
|