Is anybody running a Torker II intake with stock dual snorkel 440 Magnum air cleaner on a 440 Challenger with an R/T hood? I am wondering if I can do this without clearance issues.

I looked for previous posts on this, but did not see anything specific to this combo.

Thanks

hummm it will be close but I ran a dual snorkel on my 1972 road runner with a 440 and Torker II intake and didn't have any issues with it. I think it should work but it will be close.

Thanks. Any Challenger people out there with this combo??

Don't have this exact combo. However, according to E-Brock's specs, the Torker II carb pad height is: 4.67" front / 5.20" rear and is 1.7" taller than stock. The more popular, Performer RPB intake manifold pad height is 5.35". Perhaps someone using a Performer RPM can chime in. If you currently have the stock configuration, check to see if you have the 1.7" clearance.

Thanks

my car no longer has this set up, but did when I got it.
440 Torker with 850 Holley. Aftermarket aircleaner.

Challenger, r/t hood, 440, RPM intake requires drop base aftermarket air cleaner and it is a close fit. So no way with stock air cleaner with the RPM.