Previous Thread
Next Thread
Print Thread
Ebody R/T hood, 440, and Torker II #2709291
10/22/19 07:44 PM
10/22/19 07:44 PM
Joined: Jul 2012
Posts: 63
Halifax, Nova Scotia
L
Larry Offline OP
member
Larry  Offline OP
member
L

Joined: Jul 2012
Posts: 63
Halifax, Nova Scotia
Is anybody running a Torker II intake with stock dual snorkel 440 Magnum air cleaner on a 440 Challenger with an R/T hood? I am wondering if I can do this without clearance issues.

I looked for previous posts on this, but did not see anything specific to this combo.

Thanks

Re: Ebody R/T hood, 440, and Torker II [Re: Larry] #2709508
10/23/19 12:50 PM
10/23/19 12:50 PM
Joined: Jul 2004
Posts: 4,701
Watertown, WI
MikeyT Offline
master
MikeyT  Offline
master

Joined: Jul 2004
Posts: 4,701
Watertown, WI
hummm it will be close but I ran a dual snorkel on my 1972 road runner with a 440 and Torker II intake and didn't have any issues with it. I think it should work but it will be close.


1969 Dodge Dart Swinger
Re: Ebody R/T hood, 440, and Torker II [Re: MikeyT] #2710643
10/28/19 02:38 PM
10/28/19 02:38 PM
Joined: Jul 2012
Posts: 63
Halifax, Nova Scotia
L
Larry Offline OP
member
Larry  Offline OP
member
L

Joined: Jul 2012
Posts: 63
Halifax, Nova Scotia
Thanks. Any Challenger people out there with this combo??

Re: Ebody R/T hood, 440, and Torker II [Re: Larry] #2710977
10/29/19 05:31 PM
10/29/19 05:31 PM
Joined: Feb 2003
Posts: 1,126
Tucson, AZ
C
cruzin Offline
super stock
cruzin  Offline
super stock
C

Joined: Feb 2003
Posts: 1,126
Tucson, AZ
Don't have this exact combo. However, according to E-Brock's specs, the Torker II carb pad height is: 4.67" front / 5.20" rear and is 1.7" taller than stock. The more popular, Performer RPB intake manifold pad height is 5.35". Perhaps someone using a Performer RPM can chime in. If you currently have the stock configuration, check to see if you have the 1.7" clearance.

Re: Ebody R/T hood, 440, and Torker II [Re: cruzin] #2711188
10/30/19 11:32 AM
10/30/19 11:32 AM
Joined: Jul 2012
Posts: 63
Halifax, Nova Scotia
L
Larry Offline OP
member
Larry  Offline OP
member
L

Joined: Jul 2012
Posts: 63
Halifax, Nova Scotia
Thanks

Re: Ebody R/T hood, 440, and Torker II [Re: Larry] #2711262
10/30/19 02:05 PM
10/30/19 02:05 PM
Joined: Jul 2005
Posts: 659
SE Wisconsin, USA
RP's R/T's Offline
mopar
RP's R/T's  Offline
mopar

Joined: Jul 2005
Posts: 659
SE Wisconsin, USA
my car no longer has this set up, but did when I got it.
440 Torker with 850 Holley. Aftermarket aircleaner.

Re: Ebody R/T hood, 440, and Torker II [Re: RP's R/T's] #2711396
10/30/19 07:49 PM
10/30/19 07:49 PM
Joined: May 2005
Posts: 188
ILL
G
Greentween Offline
member
Greentween  Offline
member
G

Joined: May 2005
Posts: 188
ILL
Challenger, r/t hood, 440, RPM intake requires drop base aftermarket air cleaner and it is a close fit. So no way with stock air cleaner with the RPM.





Powered by UBB.threads™ PHP Forum Software 7.7.1