Re: anyone know who has program to CNC -mopar stage 6 heads?
[Re: GLR]
#2303416
05/12/17 04:26 PM
05/12/17 04:26 PM
|
Joined: Jan 2003
Posts: 14,499 So. Burlington, Vt.
fast68plymouth
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 14,499
So. Burlington, Vt.
|
This wont be of any help to you...... But...... Before the Chapman stage 6's arrived on the scene, MP offered a CNC ported version of the std stage 6. I have what I believe is a set of those here in the shop(they have been CNC ported with a pretty coarse program), and fwiw...... They don't flow anything special as they came ootb. I would consider the porting that was done a nice head start on getting the bulk of the major "hogging" out of the way.......... Other than too much was actually removed from the exhaust floor. https://board.moparts.org/ubbthreads/ubbt...tml#Post2210676
68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads
|
|
|
Re: anyone know who has program to CNC -mopar stage 6 heads?
[Re: GLR]
#2303421
05/12/17 04:41 PM
05/12/17 04:41 PM
|
Joined: Aug 2013
Posts: 369 Indy
496 A-body
enthusiast
|
enthusiast
Joined: Aug 2013
Posts: 369
Indy
|
|
|
|
Re: anyone know who has program to CNC -mopar stage 6 heads?
[Re: GLR]
#2303668
05/13/17 01:11 AM
05/13/17 01:11 AM
|
Joined: Dec 2010
Posts: 1,035 Missouri U.S.A.
71yelladustr
super stock
|
super stock
Joined: Dec 2010
Posts: 1,035
Missouri U.S.A.
|
I'd also recommend KG engines. Dave does great work and can set them up anyway you want.
392 gen III hemi on E-85 727 trans Dana 60 10.02@134
|
|
|
Re: anyone know who has program to CNC -mopar stage 6 heads?
[Re: scottb]
#2303748
05/13/17 09:58 AM
05/13/17 09:58 AM
|
Joined: Feb 2005
Posts: 20,175 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,175
PA.
|
Some of you guys kill me on thinking that EVERYTHING has to be CNC'd. LOL
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: anyone know who has program to CNC -mopar stage 6 heads?
[Re: pittsburghracer]
#2303767
05/13/17 10:48 AM
05/13/17 10:48 AM
|
Joined: Oct 2011
Posts: 559 Idaho
LaRoy Engines
mopar
|
mopar
Joined: Oct 2011
Posts: 559
Idaho
|
Some of you guys kill me on thinking that EVERYTHING has to be CNC'd. LOL Yep, I hear ya.
|
|
|
Re: anyone know who has program to CNC -mopar stage 6 heads?
[Re: GLR]
#2303830
05/13/17 01:56 PM
05/13/17 01:56 PM
|
Joined: Jan 2003
Posts: 14,499 So. Burlington, Vt.
fast68plymouth
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 14,499
So. Burlington, Vt.
|
I find it can tough to compete price-wise with the CNC jobs, especially for applications where the heads to be ported are getting "extensively" modified.
None of the ones I ported ever put up "the big number" on the flow bench, but they all seemed to go pretty well in the cars they were used in.
IMO, the biggest restriction to flow with the non-Chapman stage 6's is the lack of intake port height under the valve spring.
With all the head options out there today, I think by the time you fix all the typical stage 6-isms, and buy all the parts, and have them fully ported...... I can see where you'd have more into them than some other "better" options....... And that's even if the castings themselves were free.
68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads
|
|
|
Re: anyone know who has program to CNC -mopar stage 6 heads?
[Re: GLR]
#2304423
05/14/17 05:46 PM
05/14/17 05:46 PM
|
Joined: Aug 2006
Posts: 610 long time lurker, short time p...
PorkyPig
mopar
|
mopar
Joined: Aug 2006
Posts: 610
long time lurker, short time p...
|
The heads will probably be going on a 400 block-stroked to 512 street/strip use. not sure on induction system yet. Better nail down those decisions before you put any money into those heads, in case they turn out to be a poor choice after all.
|
|
|
Re: anyone know who has program to CNC -mopar stage 6 heads?
[Re: rebel]
#2304425
05/14/17 05:48 PM
05/14/17 05:48 PM
|
Joined: Aug 2006
Posts: 610 long time lurker, short time p...
PorkyPig
mopar
|
mopar
Joined: Aug 2006
Posts: 610
long time lurker, short time p...
|
i would just send them to Larry Smith, his port job on my -1's outflows the cnc port job, but then it depends on how you want to use them. I have a set of Stage 6's on my 512 in my streetcar. they flow 350cfm@650 & my 'cuda has run 10.5's with them. Can you give more details on your 512?
|
|
|
Re: anyone know who has program to CNC -mopar stage 6 heads?
[Re: GLR]
#2304453
05/14/17 07:01 PM
05/14/17 07:01 PM
|
Joined: May 2003
Posts: 13,189 aZLiViN
J_BODY
I Live Here
|
I Live Here
Joined: May 2003
Posts: 13,189
aZLiViN
|
|
|
|
Re: anyone know who has program to CNC -mopar stage 6 heads?
[Re: fast68plymouth]
#2304522
05/14/17 09:28 PM
05/14/17 09:28 PM
|
Joined: Oct 2011
Posts: 559 Idaho
LaRoy Engines
mopar
|
mopar
Joined: Oct 2011
Posts: 559
Idaho
|
I find it can tough to compete price-wise with the CNC jobs, especially for applications where the heads to be ported are getting "extensively" modified.
None of the ones I ported ever put up "the big number" on the flow bench, but they all seemed to go pretty well in the cars they were used in.
IMO, the biggest restriction to flow with the non-Chapman stage 6's is the lack of intake port height under the valve spring.
With all the head options out there today, I think by the time you fix all the typical stage 6-isms, and buy all the parts, and have them fully ported...... I can see where you'd have more into them than some other "better" options....... And that's even if the castings themselves were free. Prime observations and advice. You have to beat Stage VI heads into submission. There are much better options out there........unless......you can do all the work on these heads yourself. And then, there are still better options than these dinosaurs.
Last edited by LaRoy Engines; 05/15/17 12:27 AM.
|
|
|
Re: anyone know who has program to CNC -mopar stage 6 heads?
[Re: GLR]
#2304610
05/14/17 11:51 PM
05/14/17 11:51 PM
|
Joined: May 2011
Posts: 625 Oakville, Wa
HOTMOPR
mopar
|
mopar
Joined: May 2011
Posts: 625
Oakville, Wa
|
NAY NAY NAY.. Ill show ya..
67 Barracuda, 470" B, Glide, FuelTech FT600, Precision, Ptc, QA1, Calvert, Smith racecraft, Afco, Dana 60. 275 radials
|
|
|
Re: anyone know who has program to CNC -mopar stage 6 heads?
[Re: GLR]
#2305201
05/15/17 10:40 PM
05/15/17 10:40 PM
|
Joined: Nov 2004
Posts: 16,483 On the run…
BloFish
I Live Here
|
I Live Here
Joined: Nov 2004
Posts: 16,483
On the run…
|
Well I may have some news for ya soon.
It really doesn't matter whether you win or lose… as long as you look good doing it!
‘65 A100 ‘69 ‘Cuda ‘73 Vega GT ‘06 Mega Cab ‘14 Mercedes SLK
|
|
|
|
|