What's up, all. In ya'lls opinion, who does the best quality remanufactured short/long block engines? Any stories/personal experiences would be welcome. Thanks for any help!

Depends on what you want to use the engine for.

Just to put into a work truck, to use as a daily driver if need be, nothing performance oriented.

I've heard good things about Carolina engines. Google them and check it out.

I've installed 3 Jasper engines and they all have been good.

GM makes some good ones too, if this is GM?

I've installed several Jasper engines over the years and all were fine.

The few remans I did ( just basic engines, no HIPO) all had cranks that were 30/30 or 40/40.. Engines worked great but we used to throw away cranks ground that much....

I supply many engine rebuilders crank and cam grinding products around the country and have for 20 years. There is the good the bad and the ugly. Many sub par big engine rebuilders PER's Production Engine Rebuilders have closed up and that has allowed the good ones to only get better. Jasper Engines engines has 2 plants 1 in Jasper and 1 in Leavenworth, Indiana both are excellent and well ran operations, AER Automotive Engine Rebuilders has 2 plants in Carrolton, Tx (Dallas) They are an authorized Ford reman. These 2 are tops in the country in my book. These 2 builders are the best in my opinion. There are few others but in my opinion these are the 2 I would buy from. I have made 100's of visits to shops and companies nation wide and have seen it ALL.

MLR426

Thank you guys! This is great information!