Dodge/Ram Techs Some Help Please (Long)
#1482450
08/10/13 06:15 PM
08/10/13 06:15 PM
|
Joined: Feb 2005
Posts: 550 Lakewood, Colorado
runnerrt
OP
mopar
|
OP
mopar
Joined: Feb 2005
Posts: 550
Lakewood, Colorado
|
Any Dodge or Ram techs I need some help please. I was driving my 2004 Ram 2500 with 5.7 hemi to go to one of the Mopar clubs car shows today (I call it the to broke to go to the Nats show) and stopped for a stop light. Upon accelerating when the light turned green my truck died, as I was costing to the shoulder I noticed the ETC light flashing. I tried to restart and nothing but I noticed all of my gauges were down to zero except the volt gauge which was higher than normal then it to would drop to nothing and the outside temp was showing -40 when it is really about 80. Called for a tow to get it to the shop I work at. Hooked my scan tool up to find 12 codes 5 of which were pending. Most of which are showing circuit high input for 5 different sensors, and some crazy things in the freeze frame data such as ECT at -40, spark advance at -64, IAT at -64 TPS 100% and Vehicle speed at 158 mph. I am a Ford diesel tech, and my friend who works at Dodge is out of town. Any input /ideas would be appreciated. As much as I lke driving my Super Bee, I do not want to drive it to work every day until he gets back. Thanks
1969 Super Bee High School car I got back
2004 Ram 2500
|
|
|
Re: Dodge/Ram Techs Some Help Please (Long)
[Re: runnerrt]
#1482457
08/11/13 10:58 PM
08/11/13 10:58 PM
|
Joined: Feb 2010
Posts: 1,377 Ohio
Todd
pro stock
|
pro stock
Joined: Feb 2010
Posts: 1,377
Ohio
|
Quote:
Any other ideas?
What codes does it have now after the battery disconnect?
|
|
|
Re: Dodge/Ram Techs Some Help Please (Long)
[Re: Todd]
#1482458
08/11/13 11:07 PM
08/11/13 11:07 PM
|
Joined: May 2013
Posts: 172 IL,USA
bdusted440
member
|
member
Joined: May 2013
Posts: 172
IL,USA
|
etc light is the throttle body and when they puke that's the codes you get.The power and ground for several components run in series on newer trucks.
currently own 1976 duster deluxe 1974 gold duster 1993 Dakota sport 2000 caravan 2002 Durango 1970 v code superbee
|
|
|
Re: Dodge/Ram Techs Some Help Please (Long)
[Re: Todd]
#1482459
08/11/13 11:42 PM
08/11/13 11:42 PM
|
Joined: Feb 2005
Posts: 550 Lakewood, Colorado
runnerrt
OP
mopar
|
OP
mopar
Joined: Feb 2005
Posts: 550
Lakewood, Colorado
|
What codes does it have now after the battery disconnect?
I will pull them in the morning.
1969 Super Bee High School car I got back
2004 Ram 2500
|
|
|
Re: Dodge/Ram Techs Some Help Please (Long)
[Re: runnerrt]
#1482464
08/12/13 04:28 PM
08/12/13 04:28 PM
|
Joined: Feb 2010
Posts: 1,377 Ohio
Todd
pro stock
|
pro stock
Joined: Feb 2010
Posts: 1,377
Ohio
|
Unplug the crank sensor and see if the affected sensors start reading right. Have had those in the past short out and cause all kind of no start and no communication issues. If that's not it start unplugging one 5v sensor at a time and go from there. Does your scanner comm over the PCI bus or generic bus?
Last edited by Todd; 08/12/13 04:31 PM.
|
|
|
Re: Dodge/Ram Techs Some Help Please (Long)
[Re: runnerrt]
#1482466
08/12/13 08:39 PM
08/12/13 08:39 PM
|
Joined: Feb 2005
Posts: 550 Lakewood, Colorado
runnerrt
OP
mopar
|
OP
mopar
Joined: Feb 2005
Posts: 550
Lakewood, Colorado
|
Ok, I borrowed a friends good scanner and with it it brought up even more codes, they are as follows P2016 ETC force limited power P2111 ETC stuck open P060B ETC A/D ground performance P2167 APP sensor 2 max stop performance P2116 APP sensor 2 min stop performance P2128 APP sensor 2 circuit hi P2123 APP sensor 1 circuit hi On data it shows throttle position at 133% but the blade is closed.
1969 Super Bee High School car I got back
2004 Ram 2500
|
|
|
|
|