Re: Bad rollover after run , driver loses his life
[Re: bigdad]
#1139116
12/19/11 09:07 AM
12/19/11 09:07 AM
|
Joined: Feb 2005
Posts: 28,312 Cincinnati, Ohio
Challenger 1
Too Many Posts
|
Too Many Posts
Joined: Feb 2005
Posts: 28,312
Cincinnati, Ohio
|
So sorry to hear this. IMO it is so stupid to put a car in nutreul when going through the lights. Accidents like this is why. I doin't care what kind of lock out your shifter has, it's bad and dangerous idea. Pushing in the clutch is a different deal all together.
BTW it was one of the things Frank Haley taught us not to do when I went to his drag racing school.
Someone said it helps keep the the car from overheating?? BS
Last edited by Challenger 1; 12/19/11 12:48 PM.
|
|
|
Re: Bad rollover after run , driver loses his life
[Re: bigdad]
#1139117
12/19/11 10:20 AM
12/19/11 10:20 AM
|
Joined: Jan 2003
Posts: 5,894 Florida
Locomotion
master
|
master
Joined: Jan 2003
Posts: 5,894
Florida
|
Sad story of an unfortunate case of driver error. A reminder for the rest of us to be extra cautious.
I can't quite put my finger on it, but one line by the author really irritates. It just doesn't seem appropriate or necessary: "He purchased the $7,000 death car in June."
A sorry effort at sensationalism, perhaps?
Last edited by Locomotion; 12/19/11 10:23 AM.
|
|
|
Re: Bad rollover after run , driver loses his life
[Re: Locomotion]
#1139118
12/19/11 11:00 AM
12/19/11 11:00 AM
|
Joined: Nov 2003
Posts: 5,160 Texas
dannysbee
master
|
master
Joined: Nov 2003
Posts: 5,160
Texas
|
I agree very inappropriate. Looks like it was a 64 Hemi car. I believe those had aluminum doors. You have to wonder if the door would have been steel would the result been the same. I six point roll bar and 5 point harness would have saved his life. Very sad.
Getting old just means you were smarter than some and luckier than others.
|
|
|
Re: Bad rollover after run , driver loses his life
[Re: Locomotion]
#1139120
12/19/11 12:50 PM
12/19/11 12:50 PM
|
Joined: Feb 2004
Posts: 34,886 S.E. South Dakota !
bigdad
OP
Still Posting A Lot
|
OP
Still Posting A Lot
Joined: Feb 2004
Posts: 34,886
S.E. South Dakota !
|
Quote:
I can't quite put my finger on it, but one line by the author really irritates. It just doesn't seem appropriate or necessary: "He purchased the $7,000 death car in June."
A sorry effort at sensationalism, perhaps?
I noticed that too, I suppose in that time drag racing was still frowned upon ..
|
|
|
Re: Bad rollover after run , driver loses his life
[Re: Sixpak]
#1139122
12/19/11 03:27 PM
12/19/11 03:27 PM
|
Joined: Mar 2008
Posts: 592 Sullivan, Ohio
Max Wedge Savoy
mopar
|
mopar
Joined: Mar 2008
Posts: 592
Sullivan, Ohio
|
Quote:
"...pushed the reverse gear button by mistake..." sounds like this was a push button shift car. Do these have any reverse lockout feature from the factory? Is this still a potential hazard today for a push button trans car?
No. The only lockout is when the park lever is down in the park position.
|
|
|
Re: Bad rollover after run , driver loses his life
[Re: Challenger 1]
#1139124
12/20/11 02:21 AM
12/20/11 02:21 AM
|
Joined: Jan 2005
Posts: 3,699 Newport, Mi
Evil Spirit
master
|
master
Joined: Jan 2005
Posts: 3,699
Newport, Mi
|
Quote:
So sorry to hear this. IMO it is so stupid to put a car in nutreul when going through the lights. Accidents like this is why. I doin't care what kind of lock out your shifter has, it's bad and dangerous idea. Pushing in the clutch is a different deal all together.
BTW it was one of the things Frank Haley taught us not to do when I went to his drag racing school.
Someone said it helps keep the the car from overheating?? BS
From a drivers point of view, it is a safety issue not to put the car into neutral, because of the possibility of shifting into reverse.
From an engine builders point of view, you want to put the trans in neutral as you are lifting the throttle to protect the connecting rods - high RPM's and no load is when the rods are stressed the most and most likely to fail.
This is why many current valve bodies and shifters are reverse pattern, shifting away from park/reverse, and add a neutral at the rear of the pattern to make it pretty much impossible to hit reverse (or park) and still protect the rods.
Free advice and worth every penny... Factory trained Slinky rewinder.........
|
|
|
Re: Bad rollover after run , driver loses his life
[Re: Evil Spirit]
#1139125
12/20/11 11:30 AM
12/20/11 11:30 AM
|
Joined: Oct 2003
Posts: 7,506 Az
Crizila
master
|
master
Joined: Oct 2003
Posts: 7,506
Az
|
IMO, there was no need to pull that car out of gear. Ran those epeeds. Never had a rod problem.
Fastest 300
|
|
|
Re: Bad rollover after run , driver loses his life
[Re: Evil Spirit]
#1139127
12/21/11 01:05 AM
12/21/11 01:05 AM
|
Joined: Jan 2007
Posts: 2,431 SK,Canada
gregsrt
top fuel
|
top fuel
Joined: Jan 2007
Posts: 2,431
SK,Canada
|
That was in Alberta. I sold a 64 Dodge 330 post car to a guy from there a couple of years back. He said he had all the newspaper clippings from the crash. It happened when he was a kid. He bought my car to make a clone of that car. Not sure if he's started on it yet but he was pretty passionate about reproducing that car.
An association of men who will not quarrel with one another is a thing which has never yet existed, from the greatest confederacy of nations down to a town meeting or a vestry.
Thomas Jefferson
|
|
|
Re: Bad rollover after run , driver loses his life
[Re: gregsrt]
#1139128
12/21/11 10:44 AM
12/21/11 10:44 AM
|
Joined: Oct 2003
Posts: 21,345 Marysville, O-H-I-O
70Cuda383
Too Many Posts
|
Too Many Posts
Joined: Oct 2003
Posts: 21,345
Marysville, O-H-I-O
|
Tragic story. and yes, a 727 will lock up the rear wheels when shifted into reverse while driving at speed. happened to me. was driving along and my coil was going out, breaking down as the heat was building up, so I was getting popping, backfiring, etc. under load. while driving I was still trying to figure out what was going on...in neutral, it would rev and run just fine, sounded great. in gear it was surging and bucking. in my frustrated haste, I shifted from Drive to Neutral, with the intention of reving the engine to "clear it out" as that was seemingly helping for a little bit (again, I was still trying to figure out what was going on) I accidentally went too far and into reverse, locked up the rear wheels for about a second and a half. car got a little sideways, but not too bad, got it into neutral and coasted for a bit to gather myself up after freaking out (happened with a car coming at me in the other lane! imagine that...rears locked up, back end starts to step out, and you see a car coming at you 100 yards away and closing at 110 mph!)
anyway. I only did that once!
**Photobucket sucks**
|
|
|
Re: Bad rollover after run , driver loses his life
[Re: Crizila]
#1139130
12/21/11 12:18 PM
12/21/11 12:18 PM
|
Joined: Jan 2005
Posts: 3,699 Newport, Mi
Evil Spirit
master
|
master
Joined: Jan 2005
Posts: 3,699
Newport, Mi
|
Quote:
Quote:
Quote:
IMO, there was no need to pull that car out of gear. Ran those epeeds. Never had a rod problem.
Apples to onions unless you ran those speeds back then - the accident happened in 1964. It would have been a lot more important then to protect the connecting rods back then - there were no Carillo, Eagle, Manley, etc. rods a credit card away in the mid 60's. Rod failures were common then - even getting good bolts were a luxury. And many trophy class racers commonly used the lightest rods they could find just for that little edge in HP and to help them rev just that little bit quicker.
Yes, back then with stock max wedge rods and bolts. Maybe I was just lucky
You might have been using a little more "user friendly" gear ratio and a tighter converter, too. Stock rods that tolerate tall tires and a 4.10 may become "alergic" to shorter tires and 5.38's.
Free advice and worth every penny... Factory trained Slinky rewinder.........
|
|
|
|
|